I remember the excitement when I bought my new microwave. It was sleek, modern, and had all sorts of fancy settings. However, there was one problem – I had no idea how to vent it properly. I didn’t want the steam and odors from my cooking to linger in my kitchen, so I knew I needed to find a solution. After doing some research and seeking advice from experts, I learned how to vent a microwave through the wall. It turned out to be a simple process that made a world of difference in my kitchen. In this article, I will share step-by-step instructions on how to properly vent your microwave through the wall.
Gather the necessary tools and materials
Before you begin the venting process, it’s important to gather all the necessary tools and materials. Here’s a list of what you’ll need:
Tools:
Materials:
Choose a suitable location
The first step in venting your microwave through the wall is to choose a suitable location. Look for a spot that is close to your microwave but away from any electrical outlets or switches. You don’t want to risk damaging any wires during the process. Once you have found the perfect spot, mark it with a pencil.
Measure and mark
After choosing the location, it’s time to measure and mark the exact spot where the vent hole will be. Take your tape measure and measure the width of the vent cover. Divide this measurement in half to find the center point. Use your pencil to mark this point on the wall.
Create the vent hole
Now that you have marked the center point, it’s time to create the vent hole. Put on your safety goggles and use the hole saw attachment on your electric drill to drill a hole at the marked spot. Make sure the size of the hole matches the size of the ventilation duct you will be using.
Connect the ventilation duct
Once the hole is drilled, it’s time to connect the ventilation duct. Take one end of the duct and insert it into the hole in the wall. Push it in until it fits snugly. If the duct is too long, you can trim it to the desired length using a pair of scissors or a utility knife.
Attach the vent cover
The next step is to attach the vent cover. Place the cover over the end of the ventilation duct that is sticking out of the wall. Align the screw holes on the cover with the holes on the duct and secure it in place using screws and a screwdriver. Make sure the vent cover is securely attached and doesn’t wiggle or move.
Test the vent
Congratulations! You have successfully vented your microwave through the wall. However, before you start cooking up a storm, it’s important to test the vent to ensure it is working properly. Turn on your microwave and cook something that produces steam, such as a cup of water. If the steam is properly vented through the duct and out of the vent cover, then you’re good to go.
In conclusion, venting a microwave through the wall is a relatively simple process that can greatly improve the air quality in your kitchen. By following these step-by-step instructions, you can ensure that steam and odors are properly vented outside, leaving your kitchen fresh and odor-free. So, don’t let the fear of improper ventilation deter you from enjoying your new microwave. Give it a try and see the difference it makes!