It was a Sunday morning, and I was excited to heat up my breakfast burrito in the microwave. As I pressed the start button, I was startled by a loud and obnoxious noise coming from the turntable. Confused and annoyed, I decided it was time to fix this issue once and for all. After some research and a few trial and error attempts, I finally managed to silence the noisy microwave turntable. In this step-by-step guide, I will share with you the methods I used to fix my own noisy microwave turntable.
Gather the Necessary Tools
What you’ll need:
– Screwdriver
– Soft cloth
– Lubricant (such as WD-40)
Before you begin troubleshooting your noisy microwave turntable, it’s important to gather all the necessary tools. This will ensure that you can easily complete the task without any interruptions.
Unplug the Microwave
Safety should always be a top priority when working with any electrical appliances. Before you start fixing your microwave turntable, make sure to unplug it from the power source. This will prevent any accidental injuries or electric shocks during the process.
Inspect the Turntable Support
Step 1: Remove the Turntable
To gain access to the turntable support, you will first need to remove the turntable from the microwave. Carefully lift it from the center and pull it towards you. Place it aside on a soft cloth to avoid any damage.
Step 2: Remove the Support Wheels
Once the turntable is removed, look for the support wheels located underneath. These wheels allow the turntable to rotate smoothly. Check for any visible dirt, debris, or damage that could be causing the noise. If needed, use a soft cloth to wipe away any dirt or grime.
Step 3: Apply Lubricant
If the support wheels are in good condition and clean, but still causing noise, it’s time to apply some lubricant. Spray a small amount of lubricant, such as WD-40, onto the support wheels. This helps to reduce friction and allows the turntable to rotate more quietly. Be sure to wipe off any excess lubricant with a clean cloth.
Examine the Turntable Motor
Step 1: Locate the Motor
The turntable motor is responsible for rotating the turntable. It is usually located underneath the microwave, near the center. Carefully flip your microwave over to gain access to the motor.
Step 2: Check for Damage
Once you have located the turntable motor, check for any visible damage, such as loose or worn-out parts. If you notice any issues, you may need to replace the motor or contact a professional technician for further assistance.
Reassemble and Test
Step 1: Reattach the Turntable Support Wheels
After inspecting and fixing any issues with the turntable support and motor, it’s time to reattach the turntable. Place the support wheels back into their respective slots, ensuring they are secure and properly aligned.
Step 2: Plug in the Microwave and Test
Now that everything is back in place, plug in your microwave and test the turntable. Press the start button and listen for any noises. If the noise has been successfully eliminated, congratulations! If not, repeat the steps or consider consulting a professional technician for further assistance.
In Conclusion,
A noisy microwave turntable can be incredibly frustrating, especially when you’re trying to enjoy a quiet meal or snack. By following this step-by-step guide, you can troubleshoot and fix the issue on your own. Remember to always prioritize safety, unplug the appliance before beginning any repairs, and consult a professional if needed. Now, I can confidently heat up my breakfast burrito without any annoying noises – and you can too!