I love using my microwave for quick meals and reheating leftovers, but over time, I noticed that the glass on the door had become dirty and cloudy. It was frustrating because it affected the visibility inside the microwave, making it difficult to see if my food was cooking properly. I knew I had to do something about it, but I wasn’t sure how to clean between the glass on the microwave door. After some research and trial and error, I discovered a quick and easy way to get that glass sparkling clean again. In this article, I will share with you the step-by-step process of how to clean between the glass on your microwave door.
Gather the necessary materials
Materials needed:
Before you dive into the cleaning process, gather all the necessary materials. You will need a flathead screwdriver to remove the screws that hold the microwave door together. Additionally, you will need a microfiber cloth or a lint-free towel for cleaning, mild dish soap and water for the cleaning solution, and a plastic spatula or credit card to help remove any stubborn debris or dirt.
Disconnect the microwave from power
Safety first:
Safety should always be a priority when working with electrical appliances. Before you begin cleaning between the glass on your microwave door, make sure to unplug the appliance from the power source. Wait for a few minutes to allow any residual electricity to be discharged completely.
Remove the screws holding the microwave door together
Step 1:
Once the microwave is disconnected from power, you can start removing the screws that hold the microwave door together. Locate the screws on the side of the microwave door and use a flathead screwdriver to carefully unscrew them. It’s important to be gentle to avoid damaging the screws or microwave door. Make sure to place the screws in a safe place to avoid losing them.
Step 2:
After removing the screws, you can gently separate the front and back panels of the microwave door. Slowly lift the back panel away from the front panel, being mindful of any wires that may be connected. Once you have separated the two panels, place the front panel, with the glass, on a clean and flat surface.
Clean the glass on the microwave door
Step 1:
Now that you have access to the glass on the microwave door, it’s time to clean it. Start by preparing a cleaning solution using mild dish soap and water. Mix a small amount of dish soap into a bowl of water, creating a soapy solution. Dampen a microfiber cloth or lint-free towel in the cleaning solution, ensuring it is not dripping wet.
Step 2:
With the damp cloth, gently wipe the glass on the microwave door. Use circular motions and apply slight pressure to tackle any greasy residue or dirt that has accumulated. Pay extra attention to any stubborn stains or spots. Repeat the process as necessary until the glass is clean and free from streaks.
Step 3:
Once you are satisfied with the cleanliness of the glass, rinse the cloth or towel and dampen it with clean water. Gently wipe the glass again, this time focusing on removing any soap residue that may remain. Ensure that you thoroughly rinse the glass to prevent any residue from drying and leaving streaks.
Reassemble the microwave door
Step 1:
Now that the glass is sparkling clean, it’s time to reassemble the microwave door. Flip the front panel, with the clean glass, and align it with the back panel. Ensure that the panels are perfectly aligned before proceeding to the next step.
Step 2:
With the panels aligned, gently push the front and back panels together. Apply slight pressure, and you will hear a satisfying snap as they come back into place. Take your time during this step to ensure a secure and proper fit.
Step 3:
Lastly, use the flathead screwdriver to reattach the screws that hold the microwave door together. Carefully tighten the screws, being cautious not to overtighten them and risk damaging the microwave door. Double-check that all screws are secure and in place.
Final thoughts
Cleaning between the glass on your microwave door may seem like a daunting task, but with the right approach and a little patience, it can be easily accomplished. By following the step-by-step guide outlined in this article, you can bring back the clarity to your microwave door and enjoy a spotless view of your food while it cooks. Remember, safety should always come first, so be sure to disconnect the microwave from power before starting the cleaning process. Happy cleaning!