I have always considered myself to be a handy person. Whenever something breaks in my house, my instinct is to try and fix it myself before calling in the experts. Recently, my microwave handle broke off, and I knew I had to tackle this repair myself. After doing some research, I found a step-by-step guide that helped me reattach my microwave handle in no time. In this article, I will share this guide with you so that you too can easily fix your microwave handle without any professional help.
Gather the necessary tools
Here are the tools you will need for this repair:
ScrewdriverSuper gluePliersReplacement screws (if required)Before getting started, make sure to unplug your microwave and ensure that it is completely powered off. Safety should always be your top priority when working with electrical appliances.
Remove the broken handle
Follow these steps to remove the broken handle:
Examine the handle carefully and locate the screws that hold it in place. In most microwaves, these screws are located on the inside of the door.Using the appropriate screwdriver, unscrew the screws and set them aside. Make sure to keep them in a safe place so that you don’t lose them.Gently pull the broken handle away from the microwave door. Be careful not to force it, as you don’t want to damage any other parts of the microwave.If the handle doesn’t come off easily, you may need to use pliers to loosen any additional screws or clips holding it in place.Clean the handle and door
Once the broken handle is removed, it’s time to clean the handle and microwave door:
Use a mild detergent and warm water to clean the handle thoroughly. Pay attention to any dirt or residue that may have accumulated over time.Similarly, clean the area around the handle on the microwave door. Remove any food particles or grime that might be stuck there.Dry both the handle and the door with a clean cloth or towel before proceeding to the next step.Reattach the handle
Now comes the moment of truth – reattaching the handle:
Apply a generous amount of super glue to the base of the handle. Make sure to spread it evenly to ensure a strong bond.Carefully align the handle with the holes on the microwave door and press firmly to attach it. Hold it in place for a few minutes to allow the glue to set.If your handle has screw holes, insert the screws and tighten them with the screwdriver until they are snug, but not overly tight. Be careful not to overtighten, as it can crack the handle or damage the door.Let the glue dry completely before testing the handle. This drying time may vary depending on the type of glue used, so refer to the manufacturer’s instructions for guidance.Test the repaired handle
Once the glue is fully dried, it’s time to test the reattached handle:
Plug in your microwave and power it on to ensure that it is working properly.Open and close the door multiple times, gently pulling on the handle to check its sturdiness.If the handle feels secure and functions correctly, congratulations – you have successfully reattached your microwave handle!In conclusion, fixing a broken microwave handle is a simple and straightforward task that you can easily accomplish on your own. By following this step-by-step guide, you can save yourself the hassle and expense of calling a professional to do the job. Remember to prioritize safety, take your time, and double-check your work. With a little patience and the right tools, you’ll have your microwave handle back in working order in no time. Happy repairing!
