My Experience Removing the Kitchenaid Microwave Door
One sunny afternoon, I found myself facing a predicament. My Kitchenaid microwave door had somehow managed to accumulate quite a bit of grime and grease. It was not a sight anyone would want to see while preparing their delicious meals. Little did I know, removing the door and giving it a thorough clean would be an easy task, thanks to a few simple steps and some handy tools. In this article, I will share with you my experience and the steps I took to easily remove my Kitchenaid microwave door.
Gather Your Tools
Before I began tackling this task, I wanted to make sure I had all the necessary tools at hand. Here’s a list of what I gathered:
Turn Off the Power
For safety purposes, it is crucial to disconnect the power supply to your microwave before attempting to remove the door. Locate the switch or unplug it from the wall socket. Safety should always be the top priority!
Remove the Screws
The next step involved removing the screws that held the outer panel of the door in place. Using a Philips screwdriver, I carefully unscrewed each one, making sure to keep them in a secure place. Once all the screws were removed, I gently wiggled the outer panel to detach it from the door frame.
Detach the Inner Panel
With the outer panel successfully removed, the inner panel was now visible. This is where the flathead screwdriver came into play. I used it to carefully pry open the edges of the inner panel, ensuring not to scratch or damage it in the process. It required a bit of finesse, but with some patience, it came off easily.
Remove the Door Glass
Underneath the inner panel, I found the door glass. It was held in place by small clips. Carefully sliding the glass upwards, I detached it from the clips and set it aside. Be cautious not to apply too much force, as the glass is delicate and can break.
Clean and Reassemble
Now that I had successfully removed all the necessary components, it was time to give them a good cleaning. Using a bowl of warm water and dish soap, I soaked a microfiber cloth and wiped away the grime and grease. For stubborn stains, I gently scrubbed using a soft brush. Once everything was spotless, I allowed the components to air dry.
When the parts were dry, I reassembled them in the reverse order. I slid the clean door glass back into its clips, carefully snapped the inner panel back into place, and reattached the outer panel using the screws. With each step, it became clear that removing the Kitchenaid microwave door was much simpler than I initially thought.
Conclusion
Removing and cleaning the Kitchenaid microwave door turned out to be an easy task, thanks to a few simple steps and essential tools. With a Philips screwdriver, flathead screwdriver, tape measure, bowl or container, microfiber cloth, and dish soap, I was able to disassemble the door, clean the components, and effortlessly reassemble them. Now, my Kitchenaid microwave not only functions perfectly, but its door is also sparkling clean. So, if you find yourself facing a grimy microwave door, don’t panic. Just follow these steps, and you’ll have it looking brand new in no time!